FlashAir™ Developers
Command Status Register
Last update: March 2015Command Response Status Queue
The Command Response Status Queue contains one or multiple status information of executed commands. FlashAir supports a single command execution at a time. In other words, FlashAir always returns a response to Command Response Status #1.
| Address | Size [Bytes] | Name | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 | Read/Write |
|---|---|---|---|---|---|---|---|---|---|---|---|
0440h |
20 |
See Table below |
Read Only |
||||||||
0454h |
20 |
Command Response Status #2 |
Read Only |
||||||||
… |
|||||||||||
04CCh |
20 |
Command Response Status #8 |
Read Only |
||||||||
Command Response Status
A Command Response Status contains information about the executing command.
| Size [Byte] | Name | Short Description | Read/Write |
|---|---|---|---|
1 |
Status Registration |
Denotes the command status registration |
Read Only |
1 |
Reserved |
Read Only |
|
2 |
iSDIO command id |
Command id corresponding to one in Command Write Data. |
Read Only |
4 |
iSDIO command sequence id |
Command sequence id corresponding to one in Command Data. |
Read Only |
1 |
Response Status |
Denotes the status of a specified command processing |
Read Only |
3 |
Reserved |
Read Only |
|
4 |
Reserved for Vendor Error Status |
This field is reserved for vendor error status. |
Read Only |
4 |
Response Data Size |
Denotes the size in bytes of the Response Data |
Read Only |